SparkMaker - The Most Affordable Desktop SLA 3D Printer-KICKSTARTER
SparkMaker - The Most Affordable Desktop SLA 3D Printer-KICKSTARTER
SparkMaker - The Most Affordable Desktop SLA 3D Printer
Affordable, Easy-to-use, and High Quality. SparkMaker has everything you need to start SLA printing.
SparkMaker is compact, beautiful, and user-friendly. At 10 x 6.7 x 6.7 inches (27.5 x 17 x 17 cm) and a weight of only 6.6 pounds (3Kg), the SparkMaker fits perfectly in any office, studio or workshop.
it is small un size but has room where it matters. The SparkMaker 3D printer has a uniform maximum build areas of 4 x 2.2 inches (10.2 x 5.6 cm) and a build height of 5 inches (12.5 cm).
Printing at 100 micrometer XY resolution and up to 20 micrometer Z layer thickness, SparkMaker has an amazing ability to print in higher resolution compared to DLP 3D printers.
However, an affordable price doesn't mean we compromised on the quality. The 102 x 56 x 125 print area means that SparkMaker is ideal for scale prototyping as well as general 3D printing.
SparkMaker goes with the mature technology and inexpensive LCD display with UV backlight to curing photosensitive resin layer by layer. The structures of SparkMaker will be made by injection mold. SparkMaker uses our own developed control board but not the expensive Raspberry Pi or other open source control boards.
SparkMaker uses the high precision linear guides instead of plain shaft guides, and high quality stainless steel T2 screw.
These are the key reasons why it can be cost effective but still has a precise dimensional accuracy.
The price starting from 99 US$
Visit the campaign Now on Kickstarter
Support me and Follow me on:
Affordable, Easy-to-use, and High Quality. SparkMaker has everything you need to start SLA printing.
SparkMaker is compact, beautiful, and user-friendly. At 10 x 6.7 x 6.7 inches (27.5 x 17 x 17 cm) and a weight of only 6.6 pounds (3Kg), the SparkMaker fits perfectly in any office, studio or workshop.
it is small un size but has room where it matters. The SparkMaker 3D printer has a uniform maximum build areas of 4 x 2.2 inches (10.2 x 5.6 cm) and a build height of 5 inches (12.5 cm).
Printing at 100 micrometer XY resolution and up to 20 micrometer Z layer thickness, SparkMaker has an amazing ability to print in higher resolution compared to DLP 3D printers.
However, an affordable price doesn't mean we compromised on the quality. The 102 x 56 x 125 print area means that SparkMaker is ideal for scale prototyping as well as general 3D printing.
SparkMaker goes with the mature technology and inexpensive LCD display with UV backlight to curing photosensitive resin layer by layer. The structures of SparkMaker will be made by injection mold. SparkMaker uses our own developed control board but not the expensive Raspberry Pi or other open source control boards.
SparkMaker uses the high precision linear guides instead of plain shaft guides, and high quality stainless steel T2 screw.
These are the key reasons why it can be cost effective but still has a precise dimensional accuracy.
The price starting from 99 US$
Visit the campaign Now on Kickstarter
Support me and Follow me on:
Post a Comment