DACBerry PRO Professional Soundcard for Raspberry Pi
DACBerry PRO Professional Soundcard for Raspberry Pi -kickstarter
After about 1 year of development, the third one to born on the family is the DACBerry PRO. A High-End I2S Sound Card specially designed to fit on practically all of the Raspberry Pi models and other compatible boards.
Up to 384kHz playrate and Balanced Analog Output, supported by using the XLR expansion board for DACBerry PRO.
With a built-in 3W Hi-Fi Stereao Hedphone Amplifier, you will be able to use from 4 Ohm to 600 Ohm Professional Studio Headphones. Two RCA and one 6.35mm jack are fitted to the board.
DACBerry PRO is one of the most advanced Raspberry Pi Soundcards in the market, with four independent Ultra Low-Noise Power Supplies to bring you the best Audio Experience ever. No external power needed!
- TI Burr Brown 32-bit/384kHz DAC (PCM5242)
- Integrated hardware volume control
- Built in 3W Hi-Fi Headphone Amplifier (TPA6120A2)
- 114db SNR, and -94db THD
- 6.35mm Audio Jack
- 4 to 600 Ohm Studio Headphones
- +/-15V Integrated Voltage Regulator
- Isolated Digital and Analog Circuits
- Quad Low-Noise Integrated Power Supplies
- Raspberry Pi powered, no external power requirements
- Industry standard audio quality Phono/RCA connectors
- Built-in header to deliver Balanced output to XLR or similar
- Built-in mini DSP Fully built and tested Raspberry Pi accessory
- Designed and assembled in Barcelona, Spain.
It's only working on a Raspberry Pi? The answer is NO! Fully pin compatible with:
- Raspberry Pi A+/B+ – 2B – 3B
- Raspberry Pi Zero
- Raspberry Pi Zero W
- Asus Tinker Board .
The price starting from 66$
Visit the campaign Now on Kickstarter
Support me and Follow me on:
After about 1 year of development, the third one to born on the family is the DACBerry PRO. A High-End I2S Sound Card specially designed to fit on practically all of the Raspberry Pi models and other compatible boards.
Up to 384kHz playrate and Balanced Analog Output, supported by using the XLR expansion board for DACBerry PRO.
With a built-in 3W Hi-Fi Stereao Hedphone Amplifier, you will be able to use from 4 Ohm to 600 Ohm Professional Studio Headphones. Two RCA and one 6.35mm jack are fitted to the board.
DACBerry PRO is one of the most advanced Raspberry Pi Soundcards in the market, with four independent Ultra Low-Noise Power Supplies to bring you the best Audio Experience ever. No external power needed!
- TI Burr Brown 32-bit/384kHz DAC (PCM5242)
- Integrated hardware volume control
- Built in 3W Hi-Fi Headphone Amplifier (TPA6120A2)
- 114db SNR, and -94db THD
- 6.35mm Audio Jack
- 4 to 600 Ohm Studio Headphones
- +/-15V Integrated Voltage Regulator
- Isolated Digital and Analog Circuits
- Quad Low-Noise Integrated Power Supplies
- Raspberry Pi powered, no external power requirements
- Industry standard audio quality Phono/RCA connectors
- Built-in header to deliver Balanced output to XLR or similar
- Built-in mini DSP Fully built and tested Raspberry Pi accessory
- Designed and assembled in Barcelona, Spain.
It's only working on a Raspberry Pi? The answer is NO! Fully pin compatible with:
- Raspberry Pi A+/B+ – 2B – 3B
- Raspberry Pi Zero
- Raspberry Pi Zero W
- Asus Tinker Board .
The price starting from 66$
Up to 384kHz playrate and Balanced Analog Output, supported by using the XLR expansion board for DACBerry PRO.
With a built-in 3W Hi-Fi Stereao Hedphone Amplifier, you will be able to use from 4 Ohm to 600 Ohm Professional Studio Headphones. Two RCA and one 6.35mm jack are fitted to the board.
DACBerry PRO is one of the most advanced Raspberry Pi Soundcards in the market, with four independent Ultra Low-Noise Power Supplies to bring you the best Audio Experience ever. No external power needed!
- TI Burr Brown 32-bit/384kHz DAC (PCM5242)
- Integrated hardware volume control
- Built in 3W Hi-Fi Headphone Amplifier (TPA6120A2)
- 114db SNR, and -94db THD
- 6.35mm Audio Jack
- 4 to 600 Ohm Studio Headphones
- +/-15V Integrated Voltage Regulator
- Isolated Digital and Analog Circuits
- Quad Low-Noise Integrated Power Supplies
- Raspberry Pi powered, no external power requirements
- Industry standard audio quality Phono/RCA connectors
- Built-in header to deliver Balanced output to XLR or similar
- Built-in mini DSP Fully built and tested Raspberry Pi accessory
- Designed and assembled in Barcelona, Spain.
It's only working on a Raspberry Pi? The answer is NO! Fully pin compatible with:
- Raspberry Pi A+/B+ – 2B – 3B
- Raspberry Pi Zero
- Raspberry Pi Zero W
- Asus Tinker Board .
The price starting from 66$
Visit the campaign Now on Kickstarter
Support me and Follow me on:
Post a Comment