DACBerry AMP/+ Analog Soundcard & Amplifier for Raspberry Pi - kickstarter
DACBerry AMP/+ Analog Soundcard & Amplifier for Raspberry Pi - kickstarter
After about 6 month of development, the second one to born on the family is the DACBerry AMP and AMP+.
An affordable I2S Sound Cards and Stereo Amplifiers specially designed to fit on practically all of the Raspberry Pi models and other compatible boards.
You can use it as a standard sound card with analog output or you can use it as stereo amplifier. Also if you want, use both at same time!
There are many projects you can do with these boards! We used one of them to restore an old 60's radio in a non working condition. It's really cool to play oldies on it using Spotify!!
DACBerry AMP
– Class D 3W+3W Stereo Audio Amplifier + DAC
– Directly powered from the Raspberry Pi
– Analog Output + Speakers Output
– Up to 0.2W on 32 Ohm Headphones
– PCM5102 delivering up to 192kHz / 24bit resolution
– Balanced Analog Outputs
– 4 pin terminal block and 3.5mm phone jack
– Compatible with all Raspberry Pi’s with the 40-pin connector
– Compatible with other boards using I2S protocol
– Low-Noise design with isolated Digital and Analog parts
– Compatible with OSMC / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others
DACBerry AMP+
– Class D 10W+10W Stereo Audio Amplifier + DAC
– 12V Step-Up Converter for Amplifier (No AC adapter needed)
– Directly powered from the Raspberry Pi
– Analog Output + Speakers Output
– Up to 0.2W on 32 Ohm Headphones
– PCM5102 delivering up to 192kHz / 24bit resolution
– Balanced Analog Outputs
– 4 pin terminal block and 3.5mm phone jack
– Compatible with all Raspberry Pi’s with the 40-pin connector
– Compatible with other boards using I2S protocol
– Low-Noise design with isolated Digital and Analog parts
– Compatible with OSMC / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others
It's only working on a Raspberry Pi? The answer is NO! Fully pin compatible with:
- Raspberry Pi A+/B+ – 2B – 3B
- Raspberry Pi Zero
- Raspberry Pi Zero W
- Asus Tinker Board
Also compatible with other boards through I2S protocol
The price starting from 20 €
Visit the campaign Now on Kickstarter
Support me and Follow me on:
An affordable I2S Sound Cards and Stereo Amplifiers specially designed to fit on practically all of the Raspberry Pi models and other compatible boards.
You can use it as a standard sound card with analog output or you can use it as stereo amplifier. Also if you want, use both at same time!
There are many projects you can do with these boards! We used one of them to restore an old 60's radio in a non working condition. It's really cool to play oldies on it using Spotify!!
DACBerry AMP
– Class D 3W+3W Stereo Audio Amplifier + DAC
– Directly powered from the Raspberry Pi
– Analog Output + Speakers Output
– Up to 0.2W on 32 Ohm Headphones
– PCM5102 delivering up to 192kHz / 24bit resolution
– Balanced Analog Outputs
– 4 pin terminal block and 3.5mm phone jack
– Compatible with all Raspberry Pi’s with the 40-pin connector
– Compatible with other boards using I2S protocol
– Low-Noise design with isolated Digital and Analog parts
– Compatible with OSMC / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others
DACBerry AMP+
– Class D 10W+10W Stereo Audio Amplifier + DAC
– 12V Step-Up Converter for Amplifier (No AC adapter needed)
– Directly powered from the Raspberry Pi
– Analog Output + Speakers Output
– Up to 0.2W on 32 Ohm Headphones
– PCM5102 delivering up to 192kHz / 24bit resolution
– Balanced Analog Outputs
– 4 pin terminal block and 3.5mm phone jack
– Compatible with all Raspberry Pi’s with the 40-pin connector
– Compatible with other boards using I2S protocol
– Low-Noise design with isolated Digital and Analog parts
– Compatible with OSMC / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others
It's only working on a Raspberry Pi? The answer is NO! Fully pin compatible with:
- Raspberry Pi A+/B+ – 2B – 3B
- Raspberry Pi Zero
- Raspberry Pi Zero W
- Asus Tinker Board
Also compatible with other boards through I2S protocol
The price starting from 20 €
Visit the campaign Now on Kickstarter
Support me and Follow me on:
Post a Comment